Washer Repair — same-day across the GTA.
Front-load, top-load — won't drain, won't spin, error codes.
By starting a chat or call you agree to our privacy policy and to receive service follow-ups about your request. Calls and chats are recorded for quality.
What's usually wrong.
Tell us the symptom — we'll narrow it down in chat and send a tech with the right parts.
Won't drain at end of cycle
Clogged drain pump filter, kinked drain hose, or a failed pump impeller.
Won't spin
Failed lid switch (top-load), broken drive belt, motor coupling, or an unbalanced load tripping the safety.
Door / lid won't unlock
Door-lock sensor failure on front-load units, or a stuck interlock on top-load.
Leaking onto the floor
Worn door seal (front-load), failed inlet hose, or a cracked drain pump housing.
Loud during spin
Worn tub bearings, failed shock absorbers, or a coin / button caught between drum and outer tub.
Won't start at all
Failed door switch, control board fault, or no power to the outlet.
From your call to your warranty.
Same flow on every visit — no surprises.
Diagnose
Tech arrives, runs through the symptom on-site, and identifies the failed part — drain pump, drive belt, lid switch, control board, or seal.
Quote
You get a firm price for parts plus labour before any work starts. You approve or decline.
Repair
Most washer repairs are completed on the first visit — drain pumps, lid switches, belts, and door seals are stocked on the truck.
Test
Tech runs a full wash + spin cycle and confirms the fix before leaving. We don't bill until the appliance works.
Warranty
1 year on parts and labour. If the same issue comes back, we come back at no cost.
All major brands.
If your brand is rare, we'll tell you upfront.
Frequently asked questions
If yours isn't here, call 416-436-3182 or start a chat.
How fast can a technician arrive for a broken washer?
Most GTA cities, same day or next day. Emergencies (washer flooding the floor) get priority — in Toronto core and inner suburbs we usually have a tech at your door in 2–4 hours. Call 416-436-3182 or email info@appliancescitywide.com and we'll quote a real arrival window before you book.
Why won't my washer drain at the end of the cycle?
Almost always a clogged drain pump filter (front-load) or a kinked drain hose. Coins, hair clips, and small socks are the usual culprits. Sometimes the pump impeller itself has failed. Start a chat with the brand and the symptom and we'll narrow it down before sending a tech.
Is it worth repairing a 10-year-old washer?
Sometimes. We use the 50% rule — if the repair is more than half the cost of a comparable new washer (and the unit is past its 10-year average useful life), replacing is usually the smarter call. ACW Rob will walk you through the numbers honestly before you book.
Do you service front-load and top-load washers?
Yes — every major brand and configuration. Front-load door-seal failures and top-load lid-switch faults are the two most common calls; both are fixable in a single visit on most brands.
What if my washer is still under manufacturer warranty?
Tell us the brand and the serial number when you call — we'll check whether the manufacturer covers in-warranty repair through their authorized network or through us. If they don't cover it, we'll quote our own repair so you can compare.